This coloured exterior varnish is a waterproof, microporous, UV resistant, VOC free, decorative oil protection for interior and exterior wood.
A blend of resins and oils give it a silky sheen finish and highlights the natural grain of the wood.
It is suitable for softwood and hardwood timber applications, giving deep penetration for waterproofing and preservation.
• all woodwork • internal wood • fascias • windows • doors
• suitable for interior and exterior wood • virtually no VOCs • high water resistant • doesn't blister or peel • UV filter protection • biocide boost • long last durable finish
New timber should be clean, non-oily and thoroughly dry. Remove all old coatings to bare wood. If the timber is not pressure treated apply an appropriate wood preservative.
For best results use a clean, lint free cloth. Apply a thin even coat in the direction of the grain, work the oil into the grain of the wood ensuring complete saturation of the timber. Tough dry in 1-2 hours. Recoat if necessary after 12 hours. Do not apply below 5° C.
Always apply to a test area before starting work. Timbers containing high natural oils, e.g. Teak and Iroko, may inhibit drying and cause impaired adhesion. Wiping surface with methylated spirit will assist adhesion. Application rollers, sponges and pads, or clothes soaked in this product, may spontaneously combust if left. Dispose of after soaking in water.