Resin Kit - 1kg

This resin kit is suitable for making your own moulds and is an alternative to air dry clay. The dried resin moulds can be adhered to your projects and then painted. The resin casts moulds with clean, crisp detail and is perfect for moulds that are more delicate and intricate.

Mix Ratio : 1A : 1B by Weight
Pot Life Mixing Time: 2-3 Minutes
Demould Time : 30 - 60 minutes
Cured Colour : Ivory

Each kit will come with the same weight in each container, but part A comes with a filler powder additive, therefore increases the volume, both part A and B are different volumes, therefore the resin must be measured by equal weights, shake well before use.

Before use, be sure that Parts A and B are at room temperature and tools and moulds or models are ready to go. Surfaces and air temperature should be above 60°F during application and for the entire curing period. Use metal or plastic mixing vessels and spatulas to avoid introducing moisture (i.e., with paper or wood tools).
Measure equal weights of part A and part B into a mixing container and mix immediately, thoroughly scraping sides and bottom for one minute. Pour mix into mould cavity. Once the containers of Parts A and B are opened, they should be resealed tightly as atmospheric moisture contamination may cause foaming of the plastic.

Make in small quantities and work quickly due to the short mixing time of 2-3 minutes.

NB: This product is chemical based and available to adults only. Please follow the instructions on the packaging and keep out of the reach of children.